5 TIPS FOR WATCHING YOUTUBE COMPLETE FILMS

STREAMING VIDEO – They often disappear as quickly as they have appeared: smart guys regularly post entire HD movies on YouTube. Here’s how to find them.

YouTube can hunt for the pirated movies put on line on its video platform, they keep coming back, even if only for a few hours. If you are fast enough, it is possible to enjoy it. Of course, you probably will not find all the films you are looking for but if you have a list of a dozen films you want to see, chances are that at least one of them is present on Youtube. Here are some tips to find them.

► The right keywords to use
It’s not enough just to look for the title of a movie to fall on the full movie (though it may happen). Most often, you will only find the trailer. The best is to add “full movie” / “full movie” after the title (you can even do a search only on these keywords if you do not know what to look at precisely). You can also add “VF” / “VOSTFR” / French after if the film is in English and you need either a dubbing or subtitles.
► Think of films split into several parts
Do not hesitate to add “part 1” to your search. This may allow you to find a full-length movie on YouTube that has been split into several parts to pass the upload limitations and try to pass between the drops. It was then titled “Part 1”, “Part 2”, etc.
► The filter that arranges everything
To further refine the search, once the results are displayed, go to the filters. Among the different options, look at the length of the videos and click on “more than 20 minutes”. This will avoid the trailers most of the time. But be careful, if the film has been cut into several parts, it will no longer be visible. You have to try with and without.
► Rebuilding the right channels / accounts
These are often the same people who upload movies on YouTube. It can be interesting to “go up” the thread of a chain or an account to discover the other treasures that they have to propose. And, who knows, maybe you’ll fall on a nugget …
► Beware of traps
The title and the picture seem engaging. You finally found the film. Except that when you start playback, the movie does not start but it is a message prompting you to click the link below to find – really – the movie. Never click, it is always a scam in one way or another (or a way to make you click on 245 ads and finally do not offer anything).
More tips


TIPS – How to recover a video or audio file from YouTube? There is a simple way that metronews explains.
You love this clip or this song, but you can not find it anywhere other than on YouTube. Unfortunately you can not always be connected to the Internet to listen to it. A tip allows you to download the video or audio track directly from YouTube in two clicks.
When you are on the YouTube page of the video in question, simply add the letters “ss” in front of “youtube.com” in the address bar and press Enter. You will then be redirected to Savefrom.net. The search field will be prefilled with the address of the page in question, click the yellow button Download.

There, several qualities of download will be proposed, from the lowest to the definition HD if it already available on YouTube. Bonus Gift: At the bottom of the list are also the audio versions, ideal for clips.

TIPS – Want to make your YouTube videos private? Metronews has the solution and this is configured in two clicks.
Norman, Cyprien … thank you but no thanks. You do not want to become the next fashionable youtube? Do you prefer to keep your videos private and share them with you (and only with them)? Google allows this setup on its video sharing service, yet need to know how to do it. Metronews explains how to do this.

To do this, log in to your YouTube account first. Then go to this page. In the “Confidentiality” line, scroll down the drop-down menu and choose “Private”. All the next videos you publish will be visible only by you.
Privatize your latest videos

If you want to configure your previous public videos in private mode, you will have to go to each one of them. Click on the pencil icon at the bottom left of the video (Info and Settings). Once on the edit page, click on the drop-down menu that displays “Public” and go to “Private”.

You will then be able to specify in the field below, the people with whom you want to share it, by means of e-mail address or Google+ profiles.

HOW TO MAKE YOUR GUITAR UNIQUE?

Making your possessions become unique always an appealing thing to do, and your guitar is not an exception. You already own an acoustic guitar and want to make it unique than ever but wonder whether you could with a guitar just under $500. The answer is that you totally could turn your guitar to be the best acoustic guitar under 500 than ever. Don’t be afraid that you don’t have huge budgets for this since it does not cost you a big deal. However, what you need is your patience and also your sense of aestheticism – just a little bit. Now, follow some simple tips below.
Best-Acoustic-guitar-Under-500
1. Decorating the body of your guitar
– Paint your guitar: an important thing to notice is that you have to disassemble your guitar to make sure other parts of the guitar are safe before spaying paint to the body. After that, you can add some designs or repaint it as your hobby.
– Add stickers or decals: You can add any stickers or decals of different colors and shapes, which depends on your interest.
– Draw or write with pens: you can be free to design your patterns, words, pictures or even your signature on the body of your guitar with paint markers, markers or pens. You should try your designs with the pencil because most of the markers are permanent.

2. Customizing your guitar with other accessories
Together with the guitar, there exist a lot of other accessories, including picks, pickguards, strap, case and so on. You could have many options here: buy the unique ones or make the existing ones more unique. For example, with a case, if you are confident with your woodworking skills, you can make your case. The important thing is that you must shape your case so that there is no extra room inside and your guitar will not be damaged.
Another option is that you can decorate your existing case. By this way, you are free to express your identity and style. For instance, in a soft case, you can sew or iron on and attach some buttons if you like. On a hard case, you can add stickers, design your patterns or pictures which pens or paints, just like the way you decorate the body of the guitar mentioned above. On any case, you can also customize the lining by hand-sewing or use fabric glue to attach your fabric outside and even inside your case, as long as your guitar still fit in.
best-acoustic-guitar-for-the-money-under-500
3. Adding custom guitar parts
– Using fretboard inlay stickers: Inlay Stickers are easy put under the strings by your fingers. Try to alter the existing inlay by these stickers as your favor. The good thing is that use can alter it whenever you want. You can also apply different stickers, designs or words for each fret. Just make it your own. Remember that before applying the inlay stickers, be careful to remove the strings and clean the fretboard carefully.
– Add a unique pickguard: A pickguard is not only a good tool to protect the surface of the guitar from being scratched by the pick. With the guitar that doesn’t have a pickguard, it is easy for you to buy one. In contrast, if your guitar has had a pickguard already, you can also replace it with another one.
– Try colorful strings: replace the old strings with the new ones. One thing to consider is the quality. So you should balance between the appearance and the quality and make sure that you don’t sacrifice the quality of the sound created.
– Install new bridge pins: The bridge pins are used to hold the strings. You can replace the existing pins of your guitar with new ones made of different materials. The materials of the pins also affect the sound of the guitar strings. For example, the pins made from born can improve the sound.
7489124186_1624b51ca5_k (1)
I hope that with these simple guides above, you can have some ideas to make your guitar become the unique one. I believe that with good appearance, your guitar will give you the motivation to practice every day. After all, the look of the guitar is a connection between your hobby and your soul.

Four Tips For Using Your Delay Pedal

Read these below tips on using your best delay pedal.

using-your-delay-pedal

From a mere cosmetic effect, which can beautify our doorbell providing spatiality, to radically innovative uses in search of air or directly Martian sounds, through pragmatism to fatten our sound, the delay is capable of many things, and each must decide whether some of its applications is suitable for your needs or not. One thing we warn you: these small (well, sometimes huge, what fool) apparatus basically get a copy of our signal to delay in time (from a few milliseconds to a few hundred) and add it to the original sometimes adding different repetitions and even degrade progressively as they decay in search of an analog heat to remember those tapes; these devices, I say, are complete and unavoidably addictive. The proof is that almost no “Pedalboard of the stars” escapes incorporating one, if not several, delays in the sound chain.

Do you not know where to start? We leave a few traditional uses to begin to experiment and discover why.

Rhythmic patterns

Okay, let’s start as we like to do around here, the cart before the horse. But that, surely, one of the most associated sounds that we all use the delay is the one that displays song itself, the song also, The Edge of U2. Think of Pride (In The Name of Love), or Where The Streets Have No Name. That sound that has appropriated the guitarist, and actually could trace their origins to the Run Like Hell Pink Floyd. It is only based on the delay repeats happen to the tempo of the song.

As we said, a delay can generate a single repetition suspended in time or more. This is done by taking back the processed copy and re-insert it into the input of the effect, and the number of repetitions delay pedals that allow this (all?) Is regulated by controlling commonly called feedback or regeneration. When we want these repeats are very prominent on the subject, we will raise the level of effect (by controlling mix, dry / wet, level or is named in the pedal shift), of course. But if they do not go to the song tempo, wit not sound particularly well. Therefore, his is cuadrillas to that pace, and generate the sonic cascade house band U2.

How to do it? Ideally, your delay pedal including a tap tempo function, to add on the fly that information on the subject bpm. But if you do not, there is an easy way to calculate the milliseconds that should be set delay control of, ahem, the delay. Only you must divide 60,000 (milliseconds in a minute) by the bpm of the subject, and obtain the time between each quarter note or quarter note. For example, for a 100 pm, we get 600 ms. If we want the repetitions to occur following a pattern of eighth notes (8th notes) or sixteenth notes (16th notes), you just have to go by dividing those milliseconds between two on. Sixteenths would obtain for 150 ms, for example, and fuses (32nd notes), 75 ms.

It is a simple calculation, but if you do not have the head for math, and either a tempo tap your foot, there are applications for very Amano SAS smartphones that will calculate quickly for you for any bpm, and thus can achieve that atmospheric sound that likes pop.

fatten-your-sound-with-slapback

Fatten your sound with slapback

You’ve heard many times this term, slapback, but what is? Easy: A delay of a single repetition with an average delay. This is easily accomplished with any pedal by placing the feedback to a minimum (which give a single repetition), the delay time between 80 and 200 ms (to taste), and the level of not excessively high effect (between 20 or 50% of processed signal). Thus we obtain a copy of our signal that can intuit but not listen completely independently. The result? Our sound is perceived automatically thicker, bigger. Fat. Depending on the level to which we use the effect will be more or less prominent. The more it is, the more rockabilly sound come near you 50. And if you reduce the delay time (up to 20-50 ms) you can achieve similar effects the chorus, but without modulation, of course.

Fatten your sound: guitar hero instantly

What if we take the starting point of the slapback and lengthen the delay time and increase the repetitions? You’ll find yourself quickly with a familiar sound. You instantly soar to 80, and those solos so damn groovy hair metal. Yes, my friend, this is the way to becoming primarily a guitar hero (sonically, touching thing is already yours) in a matter of a stamp.

To achieve this, as we say, it uses a long delay time, from 200-300 ms, regulates the feedback for 3 or 4 repetitions, and do not overdo it with the effect level. You will enter fully into the reverb like you ask a fan shouted game to shake your mane sound as the delay becomes your only something bigger than life. For more drama, you can even use two delays, one short and one longer. Yeah, baby!

delays-in-stereo

Delays in stereo

If you’re adventurous riding your computer to stereo sound on stage, you can dive deeper into the world of delays planned. The thing is that on each side of your radio a processed signal appears differently. That is, with different delay times. This could be achieved using a different delay on each of the roads leading your signal to each amp or using a delay unit specifically designed to operate in stereo configurations. With various times in L and R, your sound will gain in nuance and atmosphere. Or even, you can dare with the so-called “ping-pong” delay, which is alternating repetitions between each end of the stereo.